HOW DOES NO-WELDING FENCE WORK
Here are some visual details (they are designed to give you a general overview and should not be used as a substitute for the instructions.)
Building a fence doesn't need to be difficult or confusing. With XCEL's non-welded fence system you can easily install a fence at a job-site. When you are installing a fence job, be sure to watch out for the following:
When you prepare your posts, be sure to dig 1.5 feet to 2.0 feet deep before inserting your posts. Once you have dig enough, make sure your posts are set vertical, and the distance between each panel is wide enough for the panels to be installed.
When you are measuring the distance between posts for the panels, make sure you leave ½” inches on each end for brackets. Be sure your posts are vertical (if needed, please use a level).
Be sure to give enough time for the concrete to be dried and set before beginning the panel installation.
Always do your measurements of the panels prior to the installation.