Home > News > Content

Powdercoating Fence

Jul 13, 2018

Electrostatic spray fence


The new type of fence is assembled from square tubes of different specifications. The materials used are all hot-dip galvanized steel tubes for electrostatic spraying.


The electrostatic spray fence consists of steel pipes, stainless steel anti-theft bolts and various decorative rings.

Electrostatic spray assembly fence

Electrostatic spray assembly fence


Characteristics of electrostatic spray assembly fence


1. The three parts of the horizontal pipe, the vertical pipe and the vertical column are all steel pipes of different specifications. The four-layer anti-corrosion treatment has good anti-corrosion performance and long service life. After electrostatic spraying, it can reach 15 years, and the maintenance and renewal cost of the product is exempted. After the life span, it can be repainted and can be used again.


2. The assembly fence does not need to be welded. The surface of the steel pipe is clean and tidy. There is no solder joint. It can be assembled on site, or it can be transported before being assembled.


3, the design of anti-theft bolts, can better meet the customer's safety requirements. 4, assembly fence color

Steel decorative ring electrostatic spray assembly fence

Steel decorative ring electrostatic spray assembly fence

Diverse, so it not only has beautiful characteristics, but also plays a very good protective role.


5, good weather resistance, salt spray resistance and damp heat resistance, suitable for use in different regions.


6, a variety of styles of decorative circles, also added a touch of new ideas for the fence.


Material specifications for electrostatic spray assembly fences


32 series: horizontal tube: 32*32*1.2mm vertical tube: 16*16*1.0mm column: 50*50*1.5mm/60*60*1.5mm/75*75*1.8mm/


Height: 1.2m / 1.5m / 1.8m / 2.0m

Anti-climbing electrostatic spray assembly fence

Anti-climbing electrostatic spray assembly fence



42 series: horizontal tube: 42*42*1.2mm vertical tube: 19*19*1.0mm column: 50*50*1.5mm/60*60*1.5mm/75*75*1.8mm/


Height: 1.2m / 1.5m / 1.8m / 2.0m


45 series: horizontal tube: 45*45*1.2mm vertical tube: 25*25*1.0mm column: 50*50*1.5mm/60*60*1.5mm/75*75*1.8mm/height: 1.2m / 1.5 m/ 1.8m/ 2.0m


Product coating of electrostatic spray assembly fence


Hot-dip galvanizing is a steel surface anti-corrosion process, and its anodic coating can provide point chemical protection.

Electrostatic spray assembly fence process coating diagram

Electrostatic spray assembly fence process coating diagram

Unique trimming resistance to corrosion. Phosphorus-free nanofilm conversion is to form a layer of hard-to-water phosphate protective film on the surface of steel pipe substrate to enhance the adhesion and protection of coating film and steel material, and improve the coating quality of steel substrate.


The organic zinc-rich epoxy powder coating has excellent corrosion resistance, good moisture and chemical resistance, and strong adhesion to steel substrates. More than 60% of the zinc content complements the slits and welds. The role of zinc.


: Polyester color powder coating not only has good anti-corrosion ability, especially high UV stability, and has excellent long-term anti-dirty performance and surface self-cleaning property.